Editing Lone Echo Speedrunning Guide (section)

=== Outdoor Repairs ===

==== Travel to Vomit Comet ====
After escaping the airlock, go up and turn about 170 deg to the left to head directly to the little red booster (Vomit Comet). The anomaly should pulse on your way over there. If you clipped out of the airlock and left before the outside area finished loading, it may not. We need to explore the possible routes when this happens.

==== Cargo Containers ====
[[File:Vlcsnap-2018-05-04-18h28m14s773 LI.jpg|thumb]]
Use the red booster to travel to the irradiated container in the cargo area (the red arrow on the right). Extend the scanner and position your hand so that it is pointing at the space in front of the booster so that you can scan the container as you fly by. After scanning the container, release the Fury Transport shown by the left red arrow. After some waiting, break the maglocks and head to the processing line.

==== Processing Line ====
[[File:Vlcsnap-2018-05-04-18h35m03s522 LI.jpg|thumb]]
Travel to the place indicated with the red arrow. There is a gap in the ceiling where you can slip in. First release all the trapped robot parts, then head back and flip the lever and leave the way you came. Remember to use headbutt boosting with the parts you pull out. On the way back, you  can pick up a lot of speed, so you will probably lose the item you are holding. Just bash your head against items you pass by, and you will speed up even more.

==== Primary Dig Site ====
First head to the Fury Transport and pick up the battery in the back. You can use it to boost, but be careful not to lose it. Replace the broken battery and turn the radiation damper on just below the battery. From here on the intended strats are used, just with a lot of quick crawling. Before the Fury with robot parts arrives, bring over the red booster so that you can leave immediately. 

==== Depleted Dig Site ====
Once again mostly intended strats are used here. Just park the red booster near the first button you need to press, and make sure you fetch the fresh fuse while you are waiting for the scan so that you are prepared when it breaks. We still need to investigate whether it is necessary to delay before heading to Liv, or if you just have to hit some trigger for her to spawn. The current strat is to wait at the Fury until Liv calls out that she needs help. As soon as the anomaly pulses while you are LASERing the panel, head float away from the anomaly to prompt a respawn. (is this even necessary?)

When you respawn inside the ship, grab an item and clip out the door to your right. Head outside and wait until the Fury Transport loads. (ideally wait right where it is going to spawn) Ride the Fury to the Comsat.

==== Comsat Repair ====
Bring the battery to the left end of the comsat and replace the old one. As far as I can tell, it is necessary to do three of the following four things. I’m not sure if some of them are required.
* Visual inspection (look at the biomass and use the dialog option) 
* Scan the biomass 
* Touch the inactive biomass (there is some inactive material high up to the right) 
* Cut open the panel and flip the switch
Once Hera finds signs of Liv, you are done. Head to the Fury and activate it. From now on, whenever you need to ride the Fury, use Fury Respawn Warping to travel more quickly.